Every fabrication job, from cutting to dispatch, in one view
TaktProduction tracks each job through cutting, bending, welding and coating, with materials, drawings and quality checks tied to the job. Know where every job is without walking the floor.
- Go-live in 1–2 weeks
- Barcode, QR and RFID
- Works with your accounting
- Set up for your workshop
Does this sound like your workshop?
Many fabrication shops still run jobs on whiteboards, WhatsApp groups and supervisor calls. Problems show up late, when they cost the most to fix.
Nobody can say where a job is without leaving their desk and chasing the floor.
Delays surface at dispatch, when they are expensive to fix and awkward to explain.
Revisions go out by email or print, and the team sometimes cuts to the wrong version.
Sheets, plates and consumables go out informally, and offcuts and scrap are never counted.
Welding and cutting defects get fixed quietly, so the same problems keep coming back.
When a customer queries a part, linking it back to its material means digging through job cards.
Built around how a fabrication shop runs
TaktProduction for metal fabrication follows each job from customer requirement to dispatch. Your stages, materials and checks are set up to match your workshop.
Capture the customer requirement once, then turn it into a work order with stages, departments and target dates.
- Drawings, quantities, delivery date and special instructions on the job
- Work orders routed by department and stage
- Reorder priorities when an urgent job comes in
Drawings, cutting plans, BOQs and customer approvals are attached to the job, with every revision kept.
- The floor sees only the current approved revision
- Older revisions stay on record for checking
- Customer approvals and change requests logged against each revision
Set up your own stages and move each job through them, with a clear handover between departments.
- Cutting, bending, machining, welding, grinding, coating, assembly
- Received, completed, rejected, on hold and transferred quantities
- Live work in progress at every stage
Issue material against each job and see what was actually used.
- Sheets, plates, pipes, fasteners, welding rods and paint by job
- Issued against consumed, with offcuts, scrap and returns captured
- Bought-out components tracked with in-stock material
Check work at receiving, in process and at final inspection, so defects are caught before dispatch.
- Pass, fail, rework and hold at each checkpoint
- Defect types such as wrong cutting, weld issue or paint defect
- Rework reason, responsible stage and corrective action
Link heat or lot numbers to each job, so you can trace a finished part back to its material.
- Heat or lot number recorded against every job
- Full history from material to dispatch
- QC results kept with the job record
Route approvals to the right person and see why a job is late while there is still time to act.
- Work order release, QC sign-off and dispatch clearance by rule
- Delay reasons such as material shortage, drawing query or machine breakdown
- Every approval and change logged with user, date and reason
Close each job cleanly and give management live dashboards and reports.
- Packing, delivery notes and job closure
- Dashboards for jobs by stage, delays, rework and dispatch pending
- Reports by job, department, material and defect type
What changes after go-live
Owners and managers see where every job is without daily meetings or walks to the floor.
Late stages and their reasons show up while there is still time to recover the delivery date.
The floor works from the current approved revision, and rework is recorded with its cause.
Material, QC and dispatch records sit with the job, so tracing a part takes moments, not hours.
Live in 1–2 weeks
No long ERP project. We fit TaktProduction to how your workshop already runs, and stay with you after go-live.
- 01We study your floor
We map how you run jobs today: cutting, work centres, drawings, QC and dispatch.
- 02We set it up for you
Your stages, materials, defect types, approval rules and user roles are configured to match your workshop.
- 03We train every role
From estimation and stores to supervisors, QC and dispatch, each team learns its own screens.
- 04You go live with support
We watch the first jobs closely and keep improving the set-up with you.
Works alongside your accounting system
TaktProduction handles the shop floor; your accounts stay where they are. We connect it to the system you already use, and shop-floor updates work with barcode, QR and RFID.
A UAE manufacturer with a live production dashboard
Job orders raised in full detail, each department alerted to its tasks, and quality checks built into every handover. Management now follows each job from order to dispatch.
See our case studiesMade for fabrication workshops
Multi-stage jobs through cutting, welding, grinding, painting and assembly.
Cutting and bending jobs with frequent drawing revisions and tight delivery dates.
Work orders by machine and operation, with progress and rework by stage.
One-off and repeat jobs built to customer drawings and approvals.
Long jobs with bought-out components, inspections and staged dispatch.
Short, urgent jobs that need clear priority and fast status updates.
TaktProduction for metal fabrication questions and answers
Can't find your answer? Ask our team or message us on WhatsApp.
Can TaktProduction be set up for our fabrication stages?
Yes. Omegamatrix configures TaktProduction around your actual workflow, including cutting, bending, welding, machining, grinding, coating, assembly, inspection, packing, dispatch and any custom stages you run.
How does TaktProduction handle drawings and revisions?
Drawings, cutting plans, BOQs and customer approvals are attached to each job in TaktProduction. The floor sees only the current approved revision, and older revisions stay on record for checking.
Can TaktProduction track material, offcuts and scrap by job?
Yes. TaktProduction issues sheets, plates, pipes, fasteners, consumables and bought-out components against each job, and records consumption, offcuts, scrap and returns.
Does TaktProduction support material traceability?
Yes. TaktProduction links heat or lot numbers to each job, with QC results and dispatch records, so Omegamatrix customers can trace a finished part back to its material.
How does TaktProduction track rework and defects?
Rework in TaktProduction is recorded by job, stage, defect type, reason and corrective action. Reports show repeat defects so you can fix the cause, not just the part.
Does TaktProduction replace our accounting software?
No. TaktProduction runs alongside your accounting and handles the shop floor. Omegamatrix connects it to NeatAccounts, Tally, Zoho Books, QuickBooks, Odoo, Sage or a custom API.
How long does TaktProduction take to go live in a fabrication shop?
Usually 1 to 2 weeks. Omegamatrix studies your floor, sets up TaktProduction for your job flow, trains each role and supports you through the first jobs.
Is TaktProduction suitable for smaller fabrication workshops?
Yes. TaktProduction is built for SME fabricators, and many start with core job and stage tracking. Omegamatrix quotes based on your scope.
See your fabrication floor on one live board
Book a demo with your own stages, materials and job flow. Omegamatrix will show you how TaktProduction fits your workshop. A quote depends on your scope.